FRC 24S 200A high voltage powerful ESC for heavy lift drone paramotor paraglider airboat ect

Voltage input range :DC50-100V Max DC100V

Battery cells: 12-24S

300A version is max current and rated current is 240A, Please ensure that the heat dissipation and ventilation conditions are good, the case temperature is below 80 degrees, which is normal temperature, and the peak current is 300A, 15 seconds

Control signal standard:

Compatible with model airplane remote control cycle is 50Hz, high level time is 1000-2000us command, the highest input frequency is 400Hz,. Note: The maximum input pulse width must be below 2050us

The remote control input signal position is isolated from the power supply position, and remote control signals is transmitted internally through optocoupler isolation. The red line of the remote control line must be provided with 5-8v power supply by the receiver or flight control.
Calibrate the throttle range, same as normal ESC: before the power supply, first enter
the maximum value of RC signal, then power on, ESC will produces a series of sounds;
when sounds stop, enter minimum value of RC signal, ESC will produces a series of
sounds again; after sounds stop, power off. Then ESC can be used once power on. Refer
to details of instruction